T0839 Module FirmwareCAUTION

Open-source AI-powered offensive security harness for automated penetration testing.

The instruction file, verbatim from the audited commit — this is the text the model reads, and the surface the audit's instruction layer examines. Quoted here so you can judge it without cloning anything.

---
name: "T0839_module-firmware"
description: "Adversaries may install malicious or vulnerable firmware onto modular hardware devices."
category: "configuration"
version: "18.1"
author: "cyberstrike-official"
tags:
  - mitre-attack
  - ics
  - t0839
  - persistence
  - impair-process-control
technique_id: "T0839"
tactic: "persistence"
all_tactics:
  - persistence
  - impair-process-control
platforms:
  - ICS
mitre_url: "https://attack.mitre.org/techniques/T0839"
tech_stack:
  - ics
cwe_ids:
  - CWE-276
chains_with: []
prerequisites: []
severity_boost: {}
---

# T0839 Module Firmware

## High-Level Description

Adversaries may install malicious or vulnerable firmware onto modular hardware devices. Control system devices often contain modular hardware devices. These devices may have their own set of firmware that is separate from the firmware of the main control system equipment.

This technique is similar to System Firmware, but is conducted on other system components that may not have the same capabilities or level of integrity checking. Although it results in a device re-image, malicious device firmware may provide persistent access to remaining devices.

An easy point of access for an adversary is the Ethernet card, which may have its own CPU, RAM, and operating system. The adversary may attack and likely exploit the computer on an Ethernet card. Exploitation of the Ethernet card computer may enable the adversary to accomplish additional attacks, such as the following:

- Delayed Attack - The adversary may stage an attack in advance and choose when to launch it, such as at a particularly damaging time.
- Brick the Ethernet Card - Malicious firmware may be programmed to result in an Ethernet card failure, requiring a factory return.
- Random Attack or Failure - The adversary may load malicious firmware onto multiple field devices. Execution of an attack and the time it occurs is generated by a pseudo-random number generator.
- A Field Device Worm - The adversary may choose to identify all field devices of the same model, with the end goal of performing a device-wide compromise.
- Attack Other Cards on the Field Device - Although it is not the most important module in a field device, the Ethernet card is most accessible to the adversary and malware. Compromise of the Ethernet card may provide a more direct route to compromising other modules, such as the CPU module.

## Kill Chain Phase

- Persistence (TA0110)
- Impair Process Control (TA0106)

**Platforms:** ICS

## What to Check

- [ ] Identify if Module Firmware technique is applicable to target ICS environment
- [ ] Check ICS/SCADA systems for indicators of Module Firmware
- [ ] Verify mitigations are bypassed or absent (12 known mitigations)
- [ ] Assess detection coverage (1 detection strategies)

## How to Test

### Identify Attack Surface

Determine if the target ICS/SCADA environment is susceptible to Module Firmware by examining operational technology systems and network architecture.

### Assess Existing Defenses

Review whether mitigations for T0839 are in place. If defenses are absent or misconfigured, this technique may be exploitable in the ICS environment.

## Remediation Guide

### M0941 Encrypt Sensitive Information

The encryption of firmware should be considered to prevent adversaries from identifying possible vulnerabilities within the firmware.

### M0946 Boot Integrity

Check the integrity of the existing BIOS or EFI to determine if it is vulnerable to modification. Use Trusted Platform Module technology. Move system's root of trust to hardware to prevent tampering with the SPI flash memory. Technologies such as Intel Boot Guard can assist with this.

### M0813 Software Process and Device Authentication

Authenticate connections fromsoftware and devices to prevent unauthorized systems from accessing protected management functions.

### M0937 Filter Network Traffic

Filter for protocols and payloads associated with firmware activation or updating activity.

### M0808 Encrypt Network Traffic

The encryption of firmware should be considered to prevent adversaries from identifying possible vulnerabilities within the firmware.

### M0945 Code Signing

Devices should verify that firmware has been properly signed by the vendor before allowing installation.

### M0947 Audit

Perform integrity checks of firmware before uploading it on a device. Utilize cryptographic hashes to verify the firmware has not been tampered with by comparing it to a trusted hash of the firmware. This could be from trusted data sources (e.g., vendor site) or through a third-party verification service.

### M0802 Communication Authenticity

Protocols used for device management should authenticate all network messages to prevent unauthorized system changes.

### M0804 Human User Authentication

Devices that allow remote management of firmware should require authentication before allowing any changes. The authentication mechanisms should also support Account Use Policies, Password Policies, and User Account Management.

### M0930 Network Segmentation

Segment operational network and systems to restrict access to critical system functions to predetermined management systems.

### M0801 Access Management

All devices or systems changes, including all administrative functions, should require authentication. Consider using access management technologies to enforce authorization on all management interface access attempts, especially when the device does not inherently provide strong authentication and authorization functions.

### M0807 Network Allowlists

Use host-based allowlists to prevent devices from accepting connections from unauthorized systems. For example, allowlists can be used to ensure devices can only connect with master stations or known management/engineering workstations.

## Detection

### Detection of Module Firmware

## Risk Assessment

| Finding                              | Severity | Impact      |
| -------------------------------

CAUTIONgrade B · trust 89/100 Install with care. The audit found things worth knowing before you trust its output.

What the source does

Filesystem

none-observed

Network

none-observed

Shell

none-observed

Dependencies

pinned

Secrets in source

none-found

Findings (5)

packages/app/public/apple-touch-icon-v3.png

packages/app/public/apple-touch-icon.png

packages/app/public/favicon-96x96-v3.png

packages/app/public/favicon-96x96.png

packages/app/public/favicon-v3.ico

Gates applied: no_behavioural_pass.

[![ModelsAtlas audit: T0839 Module Firmware](https://modelsatlas.com/skills/cyberstrikeus/t0839-module-firmware/badge.svg)](https://modelsatlas.com/skills/cyberstrikeus/t0839-module-firmware/)

Not your listing, or something out of date? Claim or update your listing.